Dimensions
| Bore diameter | 105 mm |
| Outside diameter | 225 mm |
| Width, total | 53.5 mm |
| Width, inner ring | 49 mm |
| Width, outer ring | 41 mm |
| Contact angle | 12.953 ° |
Performance
| Basic dynamic load rating | 462 kN |
| Basic static load rating | 530 kN |
| Reference speed | 2 200 r/min |
| Limiting speed | 3 000 r/min |
Properties
| Bearing part | Complete bearing |
| Number of rows | 1 |
| Locating feature, bearing outer ring | None |
| Bore type | Cylindrical |
| Cage | Sheet metal |
| Arrangement of contact angle (double-row bearing) | Not applicable |
| Matched arrangement | No |
| Coating | Without |
| Sealing | Without |
| Lubricant | None |
| Relubrication feature | Without |
Technical Specification
Dimensions
| d |
105 mm
|
Bore diameter |
|---|---|---|
| D |
225 mm
|
Outside diameter |
| T |
53.5 mm
|
Total width |
| d1 |
≈155.3 mm
|
Shoulder diameter of inner ring |
| B |
49 mm
|
Width of inner ring |
| C |
41 mm
|
Width of outer ring |
| r1,2 |
min.4 mm
|
Chamfer dimension of inner ring |
| r3,4 |
min.3 mm
|
Chamfer dimension of outer ring |
| a |
41.328 mm
|
Distance side face to pressure point |
Abutment dimensions
| da |
max.133 mm
|
Diameter of shaft abutment |
|---|---|---|
| db |
min.121 mm
|
Diameter of shaft abutment |
| Da |
min.193 mm
|
Diameter of housing abutment |
| Da |
max.212 mm
|
Diameter of housing abutment |
| Db |
min.206 mm
|
Diameter of housing abutment |
| Ca |
min.7 mm
|
Minimum width of space required in housing on large side face |
| Cb |
min.12.5 mm
|
Minimum width of space required in housing on small side face |
| ra |
max.4 mm
|
Radius of shaft fillet |
| rb |
max.3 mm
|
Radius of housing fillet |